D-1151 Dakota digitale VHX snelheidsmeter, toerenteller en meterpakket – analoge klok 68-77

• Speedometer – 0 -160 MPH (optional metric version 0- 255 kmh)
• Tachometer – 0- 8,000 RPM
• Oil Pressure – 0- 80 psi
• Water Temperature – 100- 260ºF (optional metric version 40- 120ºC)
• Fuel Level – E, 1/4, 1/2, 3/4, F
• Voltmeter – 9- 17 VDC

Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.

Digital Message Centers Include:

Standard Displays

• Odometer (One time user settable, Million Mile)
• Dual (A/B) Trip Meter (0- 9,999.9)
• Clock (12 hour)

Performance Meters

• 0- 60 MPH Timer (0- 100 kmh)
• 1/4 mile time
• 1/4 end speed (trap speed)
• High speed recall
• High RPM recall

Gauges

• Speedometer – 0 -255 MPH/kmh
• Tachometer – 0- 9,900 RPM
• Oil Pressure – 0- 100 psi (displayed in 1psi increments)
• Water Temperature – 100- 370ºF/40-150ºC (displayed in 1psi increments)
• Voltmeter – 9- 17 VDC
• Fuel Level – 0-99% full

Lighting

• Auto-contrasting LCD display for optimal view in the brightest of sunlight
• LED backlit at night to match/ complete the look at night.

Built-in Indicators Include:

• Turn Signals (Left/ Right)
• High Beam
• Check Engine
• Parking Brake
• Cruise Control (On/ On & Engaged when vehicle is equipped)
• Gear Position (Optional GSS-3000 sensor required)
• Wait to Start (When vehicle is equipped)
• **Not all OEM indicator lamp functions will be replaced.

Included Sensors:

• Water Temperature – 1/8″ NPT, ground isolated sensor with a 10 ft harness.
• Oil Pressure – 1/8″ NPT solid state sensor with a 10 ft harness.
• Cable Driven Speed Sensor/ Generator – Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5″ clearance extending between the cable drive output and any obstruction.
• Bushings – Each kit comes with 1/8″ to 1/4″, 3/8″ and 1/2″ NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.

Calibration and Use:

Pushbutton Control – Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.